Emerson ControlWave EFM Instruction Manual page 13

Revised Dec-2013
Figure 1-5. ControlWave Programming Environment
The tools which make up the programming environment include:
 ControlWave Designer is your load-building package. It offers
several different methods for you to create control strategy programs
that run in your ControlWave. You can use pre-made function
blocks, ladder logic, or structured languages. The resulting process
control strategy programs (called projects) are fully compatible
with IEC 61131 standards. For information on ControlWave
Designer, see the Getting Started with ControlWave Designer
manual (document D5085), and the ControlWave Designer
Programmer's Handbook (document D5125).
 The I/O Configurator, accessible via a menu item in ControlWave
Designer, allows you to define process I/O modules in the
ControlWave and configure the individual mapping of I/O points for
digital and analog inputs and outputs.
Configurator see
Handbook (document D5125).

The ACCOL3 Firmware Library, available within ControlWave
Designer, includes a series of ControlWave-specific function blocks.
These pre-programmed function blocks let you accomplish various
tasks common to most user applications including alarming,
historical data storage, as well as process control algorithms such as
PID control.
the online help within ControlWave Designer.
Introduction
ControlWave EFM Instruction Manual
the ControlWave Designer Programmer's
For information on individual function blocks, see
For information on the I/O
1-9