Audio Alert - QNAP TS-h 90FU Series User Manual

LED
Drive status Green
Red
Flashes red 5 times per
second
Off
LAN Orange
Flashes orange
Off
2.5 Gigabit Green
Ethernet speed
Orange
Off
2.5 Gigabit Orange
Ethernet activity
Flashes orange
Off
10 Gigabit Green
Ethernet
Flashes green
Off
25 Gigabit Green
Ethernet speed
Orange
Off
25 Gigabit Orange
Ethernet activity
Flashes orange
Off
Expansion Orange
Off

Audio Alert

Duration
Short beep (0.5 seconds)
Status
The drive is ready.
A drive read/write error occurred.
The drive is being located in the operating system.
No drive was detected.
The network connection is operating.
The device is being accessed from the network.
The device is not connected to a network.
The network connection is operating at 2.5 Gbps.
The network connection is operating at 1 Gbps.
A network connection has been established.
The device is being accessed from the network.
There is no network connection.
The network connection is operating at 10 Gbps.
The device is being accessed from a 10 GbE network.
The device is not connected to a 10 GbE network.
The network connection is operating at 25 Gbps.
The network connection is operating at 10 Gbps or 1 Gbps.
There is no network connection.
A network connection has been established.
Data is being transmitted.
There is no network connection.
An expansion unit is connected.
No expansion unit has been detected.
Frequency
1
3
Description
• The network connection is operating at 10 Mbps.
• There is no network connection.
• The NAS is starting up.
• When the reset button is pressed for 3 seconds,
the NAS resets configurations.
• When the reset button is pressed for 10 seconds,
the NAS resets configurations and reboots.
• The operating system was updated.
• Cannot detect installed disk.
TS-hx90FU User Guide
Description
Basic Operations 56