Installation Requirements; Setting Up The Nas - QNAP TS-h 90FU Series User Manual

Installation Requirements

Category
Environment
Hardware and peripherals
Tools

Setting Up the NAS

Important
Read all safety requirements and information carefully before setting up the NAS or
installing NAS components.
1. Place your NAS device in an environment that meets the requirements.
For details, see Installation
2. Install drives.
For details, see Installing 2.5-inch Solid-state Drives on 2.5-inch
For a list of compatible drives and expansion cards, go to http://www.qnap.com/compatibility.
3. Optional: Install expansion cards.
For details, see the following topics:
• Replacing Expansion Cards on the TS-h2490FU
• Installing Expansion Cards on the TS-h1090FU
4. Optional: Connect expansion units.
For details, see the following topics:
• Connecting SAS Expansion
• Connecting USB Expansion
5. Connect the power cord and all applicable cables.
6. Power on the NAS.
For details, see Front
7. Install QuTS hero.
For details, see QuTS hero
• Room temperature: 0˚C to 40˚C (32˚F to 104˚F)
• Non-condensing relative humidity: 5% to 95%
• Wet-bulb temperature: 27˚C (80.6˚F)
• Flat, anti-static surface without exposure to direct sunlight, liquids,
or chemicals
• Free from objects that may obstruct NAS ventilation or apply
pressure to the NAS or power cord
• Storage drives
For the list of compatible drive models, go to
www.qnap.com/compatibility.
• Network cable
• Phillips #1 or #2 screwdriver
• Anti-static wrist strap
Requirements.
Units.
Units.
Panel.
Installation.
TS-hx90FU User Guide
Item
https://
Trays.
Product Overview 15