QNAP TS-h 90FU Series User Manual page 5

Component
Frequency
Architecture
Encryption engine
Memory
Pre-installed memory
Memory slots
Maximum memory
Flash memory
Storage
Drive bays
TS-h2490FU-7232P-64G
TS-h2490FU-7302P-128G
TS-h2490FU-7302P-256G
• TS-h2490FU-7232P-64G: 8-
core/16-thread up to 3.2 GHz
• TS-h2490FU-7302P-128G: 16-
core/32-thread up to 3.3 GHz
• TS-h2490FU-7302P-256G: 16-
core/32-thread up to 3.3 GHz
x86 64-bit
AES-NI
• TS-h2490FU-7232P-64G: 64 GB
RAM: 8 x 8 GB RDIMM DDR4
ECC
• TS-h2490FU-7302P-128G: 128
GB RAM: 8 x 16 GB RDIMM
DDR4 ECC
• TS-h2490FU-7302P-256G: 256
GB RAM: 8 x 32 GB RDIMM
DDR4 ECC
16 x DDR4 RDIMM
Important
• Use only QNAP memory modules to maintain
system performance and stability. For NAS devices
with more than one memory slot, use QNAP
modules with identical specifications.
• Using unsupported modules may degrade
performance, cause errors, or prevent the
operating system from starting.
• You can only use one type of dual in-line
memory module (DIMM) at a time. Do not mix
registered DIMM (RDIMM) with load-reduction
DIMM (LRDIMM) memory.
4 TB RAM: 16 x 256 GB
5 GB (dual-boot OS protection)
24 x 2.5-inch U.2 PCIe NVMe
TS-hx90FU User Guide
TS-h1090FU-7232P-64G
TS-h1090FU-7302P-128G
TS-h1090FU-7302P-256G
• TS-h1090FU-7232P-64G: 8-
core/16-thread up to 3.2 GHz
• TS-h1090FU-7302P-128G: 16-
core/32-thread up to 3.3 GHz
• TS-h1090FU-7302P-256G: 16-
core/32-thread up to 3.3 GHz
• TS-h1090FU-7232P-64G: 64 GB
RAM: 8 x 8 GB RDIMM DDR4
ECC
• TS-h1090FU-7302P-128G: 128
GB RAM: 8 x 16 GB RDIMM
DDR4 ECC
• TS-h1090FU-7302P-256G: 256
GB RAM: 8 x 32 GB RDIMM
DDR4 ECC
12 x DDR4 RDIMM
1 TB RAM: 12 x 128 GB
10 x 2.5-inch U.2 PCIe NVMe / SATA
6Gbps
Product Overview 4