Table of Contents
Advertisement
Rail Kits
Rail kits are not included with the NAS and must be purchased separately. For details, contact an authorized
reseller or go to http://shop.qnap.com.
TS-h2490FU
TS-h1090FU
You can find installation information in the rail kit package.
QuTS hero Installation
The TS-hx90FU uses the QNAP QuTS hero operating system. You can install QuTS hero using any of the
following methods.
Method
Qfinder Pro
If the NAS is connected to your local area
installation
network, you can do the following:
(Recommended)
For details, see
Using Qfinder
Cloud installation
If the NAS is connected to the internet,
you can do the following:
For details, see
Using the Cloud
Installing QuTS hero Using Qfinder Pro
Warning
Installing QuTS hero deletes all data on the drives. Back up your data before proceeding.
1. Power on the device.
2. Connect the device to your local area network.
3. Run Qfinder Pro on a computer that is connected to the same local area network.
Model
Description
• Locate the NAS using Qfinder Pro.
• Complete the steps in the Smart
Installation Guide wizard.
Installing QuTS hero
Pro.
• Scan the QR code on the NAS.
• Log into your myQNAPcloud account.
• Use myQNAPcloud Link to remotely
access your NAS.
• Complete the steps in the Smart
Installation Guide wizard.
Installing QuTS hero
Key.
Compatible Rail Kit
RAIL-A03-57
RAIL-B02
• Computer
• Network cable
• Qfinder Pro installer
• Computer or mobile device
• Network cable
• myQNAPcloud account
• Cloud Key
TS-hx90FU User Guide
Requirements
Installation and Configuration
48
Advertisement
Table of Contents
