Installing Handles - QNAP TS-h 90FU Series User Manual

TS-h1090FU
2. Power on the expansion units.
3. Verify that the expansion units are recognized by the NAS.
a. Log on to QuTS hero as administrator.
b. Go to Main Menu > Storage & Snapshots > Overview > System .
c. Verify that the expansion units are listed.

Installing Handles

Installing handles enables you to better grip and secure the device on a rack.
1. Power off the NAS.
2. Install a handle on an angle bracket.
a. Align the openings on the handle with the two round screw holes on the angle bracket.
b. Attach the screws to lock the handle to the angle bracket.
TS-hx90FU User Guide
Installation and Configuration 46