Kyocera FS-9120DN Operating Manual page 61

Chapter 3 Using the Operator Panel
Press the or
2
> appears.
Memory Card
3 Press the key.
4 Press the or
pears.
>Format
5 Press the ENTER key. A question mark (?) appears.
>Format ?
6
Press the ENTER key. Processing appears and for-
matting of the memory card starts.
When the formatting is successfully completed, the
printer automatically prints out a format information
page.
FORMAT INFORMATION
Figure 3-18
The format information page includes the following
items;
Capacity: The total size of the memory card.
Used Space: The space the printer uses for its
system.
Free Space: The space remaining in the memory
card for storing data.
When the memory card format information is
printed, the message display returns to Ready.
3-40
key repeatedly until Memory Card
>
key repeatedly until >Format ap-
Printing a List of Data Names
The printer prints a list of all data names (referred to as par-
titions) stored in a memory card for reference. (Printing a list
is also available for a font card.) To print a list of data names
for the memory card, proceed as follows.
1 Press the MENU key.
Press the or
2
> appears.
Memory Card
3 Press the key.
4
Press the or
Partitions appears.
>List of
Partitions
5 Press the ENTER key. A question mark (?) appears.
>List of
Partitions ?
6 Press the ENTER key. Processing appears and the
printing of the list starts.
Figure 3-19
The printout (example above) includes the following
information.
Device Name/Number: CARD/A is indicated for the
memory card.
Capacity: The total capacity of the memory
card in bytes.
Used Space: The total size of the data stored in
the memory card in bytes.
Free Space: The size of the capacity remaining
in the memory card for storing
further data, including the amount
of memory that the printer uses for
its system.
key repeatedly until Memory Card
>
key repeatedly until >List of
PARTITION LIST
Device Information
Partition Information