Kyocera FS-9120DN Operating Manual page 13

Kyocera fs-9120dn: user guide
Hide thumbs Also See for FS-9120DN:
Table of Contents

Advertisement

Chapter 1 Names of Parts
1 Operator panel
Contains the keys and indicators for operating the printer.
2 Front cover
Open to replace the toner container or waste toner box.
3 Paper cassette 2
Second cassette that holds up to about 500 sheets of stan-
dard paper.
4 Paper guide
Adjust to the length of the paper to be set in the paper cas-
sette.
5 Paper stopper
Hold the lever and adjust the paper guide to the width of
the paper to be set in the paper cassette.
6 Paper cassette 1
First cassette that holds up to about 500 sheets of stan-
dard paper.
7 Handles for transport
These handles must be held by at least 4 persons when
lifting or moving the printer.
8 MP (Multi-Purpose) tray
Load paper here when printing onto small-size or special
paper.
9 Main switch
Turn ON (I) before starting to print.
0 Top tray
Printed paper is stored here.
A Toner container
B Toner container release lever
Operate to replace the toner container.
C Waste toner box
Waste toner is collected.
D Cleaning knob
Pull and push back in after toner container replacement
or when print images become soiled with toner.
1-2
Figure 1-3
E Main charger unit
When replacing the toner container, install the grid clean-
er to clean the grid.
F Cleaning brush
Used to clean the internal part of the printer.
G Power cord connector
H Option unit connector
When using the option device, connect its cable to this
connector.
I Handles for transport
These handles must be held by at least 4 persons when
lifting or moving the printer.
J Left cover 2
Open when a paper jam occurs inside the left cover 2.
K Lock lever
Pull up to open the left cover 1.
L Left cover 1
Open when a paper jam occurs.
M Memory card slot
N USB cable connector
Connect the USB cable to this connector for USB printing.
O Optional network interface card slot (OPT)
For optional network interface card.
P Network cable connector
Connect the network cable to this connector for network
printing.
Q Parallel cable connector
Connect the parallel cable to this connector for parallel
printing.
R Optional hard disk unit slot (HDD)
For optional hard disk unit.
M
N
O
P
Q
R

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs-9520dnFs 9520dn - b/w laser printerEcosys fs-9120dnEcosys fs-9520dn

Table of Contents