Kyocera FS-9120DN Operating Manual page 55

Chapter 3 Using the Operator Panel
9 Repeat above steps until you have transferred all
data (files) that you want to write to the hard disk.
Each time you finish writing data, a hard disk write
information page is printed from the printer show-
ing the information explained in step 8 above, but
pertaining only to the data just written. To see all
data contained in the hard disk at once, print a list
of data names as explained. See
Data Names on page 3-34
Deleting Data
It is possible to use the printer to delete data from a hard disk
one by one. To delete data from a hard disk, proceed as fol-
lows.
Check that the hard disk contains data. Otherwise, the
>Delete Data menu will not appear on the message display.
1 Press the MENU key.
Press the or
2
appears.
Hard Disk
3 Press the key.
Press the or
4
Data appears. The data name also appears.
>Delete Data
DataH001
5 Press the ENTER key. A blinking question mark (?)
appears before the data name.
>Delete Data
?DataH001
6 Press the or
name.
7 Press the ENTER key. Processing appears and the
data is deleted from the hard disk. The message dis-
play returns to Ready.
3-34
Printing a List of
.
key repeatedly until Hard Disk >
>
key repeatedly until >Delete
key to display the desired data
Printing a List of Data Names
The printer prints a list of all data names (referred to as par-
titions) stored in a hard disk for reference. To print a list of
data names for the hard disk, proceed as follows.
1 Press the MENU key.
2 Press the or
appears.
Hard Disk
3 Press the key.
4 Press the or
Partitions appears.
>List of
Partitions
5 Press the ENTER key. A question mark (?) appears.
>List of
Partitions
6 Press the ENTER key. Processing appears and the
printing of the list starts.
Figure 3-14
The printout (example above) includes the following
information;
Device Name/Number: HARD DISK/0 is indicated
for the hard disk.
Capacity: The total capacity of the hard disk
in bytes.
Used Space: The total size of the data stored in
the hard disk in bytes.
Free Space: The size of the capacity remaining in
the hard disk for storing further data,
including the amount of memory that
the printer uses for its system.
Partition Name: The name of the written data
assigned automatically by the printer.
key repeatedly until Hard Disk >
>
key repeatedly until >List of
?
PARTITION LIST
Device Information
Partition Information