Precautions For Handling The Hard Disk - Kyocera FS-7000 Instruction Manual

Precautions for Handling the Hard Disk

When handling the hard disk, adhere to the following precautions.
• The hard disk is delivered in an antistatic bag. To prevent any damage, briefly
touch a large metal object to ensure discharge of static electricity before
removing the hard disk from the bag.
• Never touch the hard disk's connector section directly with hands.
• When holding the hard disk, do not contact hand with surface of the circuit
board; hold at the edges of the circuit board.
• Never apply force to the metallic portion of the hard disk's surface.
• Do not touch the exposed portion beneath the hole in the surface with fingers.
• Do not apply undue force when installing.
Note
The HD-2 hard disk should be installed by your Kyocera dealer.
Please note that Kyocera may not warrant the hard disk in case of
trouble because the customer has attempted installation by him/
herself.
6
Hole
Metallic surface
portion