Verifying Installation of the Hard Disk
To verify that the hard disk has been correctly installed and initialized (formatted),
try to print out the printer's status page.
1.
Confirm that the printer's ONLINE indicator is lit and that the message
display indicates Ready.
2.
Press the STATUS key on the printer's control panel.
3.
Check the contents of the printed status page. If the Installed Options
and Option 2 items look as follows, there should be no problem.
Printer STATUS PAGE
Note
The STATUS PAGE shown above may differ from the actual
printed STATUS PAGE.
10
Installed Options
Hard-disk drive
Option 2
Hard-disk drive
Write protect
Total
User available
Installed
OFF
2097152 KB
2096856 KB