Operations For Using A Barcode Reader - Kyocera FS-7000 Instruction Manual

Information regarding virtual output trays which are set will be displayed in the
virtual mail box list. A mark is shown with the bin number for virtual output
trays which contain data. If a password is set for a virtual output tray, there is no
barcode shown for that virtual output tray. Also, "FULL" will be shown for virtual
output trays for which there was an error when data was sent to them. A VMB
ERROR LOG will be printed when data from such a virtual output tray is printed.

Operations for Using a Barcode Reader

If an optional barcode reader (BC-1) is connected to the printer, it is possible to
print data within a virtual output tray using the barcode in the list. Select the
barcode for "Output (1)" in the upper right using the barcode reader and then select
the barcode for the virtual output tray you want to print. If you want to delete the
data in a tray, select "Delete (1)" also in the upper right and then select the barcode
for the virtual output tray you want to delete. Note that all data in the tray will be
deleted.
For detailed operating procedures for the barcode reader, please read the instruc-
tions included with the barcode reader.
21