Kyocera FS-7000 Instruction Manual page 13

Reading Data (Partition) from the Hard Disk
Used to read data (partitions) selected from the data on the hard disk to the printer
memory.
1.
Have the message display indicate >Read data.
This indication is only displayed if data are stored on the hard disk.
2. When the ENTER key is pressed, ? is displayed.
3. Each time the + key is pressed, the names of data stored on the hard disk
are displayed sequentially.
To stop data reading, press the CANCEL key.
4. When the desired data name is displayed, press the ENTER key. The
message display indicates Processing, and the selected data are read
to the printer.
When data reading and processing are completed, the message display indication
returns to Ready.
Writing Data (Partitions) to the Hard Disk
Data sent from the computer can be written to the hard disk. The written data can
be read to the printer memory by operating the keys on control panel of the printer.
Partitions read to the hard disk are automatically supplied with a name, and the
partition list can be verified by print out.
1. Have the message display indicate >Write data.
2. When the ENTER key is pressed, ? is displayed.
13