Deleting Data on the Hard Disk
Data can be deleted one by one from the hard disk.
1.
Have the message display indicate >Delete data. This indication is
only displayed if data are stored on the hard disk.
2.
When the ENTER key is pressed, ? and the data name is indicated.
? and the data name is displayed.
3.
Each time the + key is pressed, the names of data stored on the hard disk
are displayed sequentially.
To discontinue the operation, press the CANCEL key.
4.
When the name of the data to be deleted is displayed, press the ENTER
key. The concerned data are deleted from the hard disk.
The message display indication returns to Ready.
Printing the Hard Disk Partition List
Information on all data and data sizes stored on the hard disk can be printed out for
confirmation.
1.
Have the message display indicate >List of Partitions.
2.
When the ENTER key is pressed, ? appears.
If you want to discontinue the printing, press the CANCEL key.
3.
If the ENTER key is pressed again, printing starts.
>Delete data
? (data name)
15