Hard Disk Operation
When the HD-2 hard disk has been correctly installed and initialized, it can be used
for the following operations.
• Reading data
• Writing data
• Deleting data
• Printing of VMB data (excluding FS-7000)
• Printing of VMB data with a password (excluding FS-7000)
• Printing of list of partitions
• Printing of VMB data lists (excluding FS-7000)
• Printing of job lists
Note
The menus related to data stored on the hard disk can be selected
from the printer. Consequently, following initialization, when there
will not yet be any data on the hard disk, only the two menus
"Reading data" and "Printing of list of partitions" can be selected.
11