F-Code Based Communication - Kyocera KM-C850 Online Manual

2-5 Various Settings in the TX Setting Dialogue Box

(2) F-Code Based Communication

1. Click on the Option button in the Address Setting tab of the TX Setting dialogue box.
The Option dialogue box will be displayed.
2. Enter the sub-address and password as it is registered in the destination fax.
• Maximum number of characters that can be entered: 20
• Characters that can be entered: 0 – 9, #, *, and a space (a space can NOT be entered as the first character)
3. Click on the OK button. The TX Setting dialogue box will be displayed once again.
Page 2-15