Kyocera KM-C850 Online Manual page 73

5-1 Registering Self-Station Information
9. Transmit the edited data to the fax machine.
Select from among the following 2 methods of transmitting data.
* If you are editing the data off-line, the Set the destination dialogue box will appear when you perform the transmission
operation. Since it is necessary to connect to the fax machine in order to transmit the data, you will need to perform the
following procedure.
Transmit all of the edited data
Point to the Send all data command under the File menu (or click on the
self-station and dialing information, etc., will be written over all corresponding data in the fax machine.
Transmit only the type of edited data that is currently displayed
Point to the Send data command under the File menu (or click on the
is related to the type of data currently displayed in the window will be written over all corresponding data in the fax
machine.
<Changing your connection to another fax machine>
Point to the Changing connection command under the File menu (or click on the
Change the destination connection in the resulting Changing connection dialogue box.
Send all data button). All of the registered
Send data button). Only the information that
Page 5-6
Changing connection button).