Kyocera KM-C850 Online Manual page 86

5-3 Registering Dialing Information
4. Select Broadcast (Program Dial) or Polling RX (Program Dial) as desired and then click on the OK button. The
Broadcast (Program Dial) or Polling RX (Program Dial) dialogue box, as appropriate, will appear.
5. Register the program dial information. Enter the following registration information.
1 Dial No. field: Enter the corresponding program dial number. (between 001 and 600)
2 Program Name field: Enter a name for that program dial number. (up to 20 characters)
3 Add button: Lets you add destinations to the program. Refer to the procedure from the following step.
4 Delete button: Lets you delete destinations from the destination list for that program.
5 Chain Deletion button: Deletes any chain number that is registered for a selected destination.
6 Set Time radio buttons: Select the ON setting when performing a Timer-Controlled Communication and then enter
6. Click on the Add button. The Add new destination dialogue box will appear.
the start time for the programmed communication in the field below.
Page 5-19
1
2
3
4
5
6