Rwrf T - [Read/Write Resource File] Set Terminate String - Kyocera KM-1500 Command Reference Manual

PRESCRIBE Command Reference
RWRF T —
Format
Parameters
terminator:
Function
254
[Read/Write Resource File] set
Terminate string
RWRF T[, 'terminator'];
ASCII text string up to 4 bytes
Set to default "WRED" if omitted.
The RWRF T command changes a terminator (default: WRED).
The terminator that was changed with this command is also available for the LAPI
command to load the API program.
Turning the power on again will return the changed terminator to "WRED".
Example:
Change the terminator to "TEST".
!R! RWRF T , "TEST"; EXIT;