Map - Move To Absolute Position - Kyocera KM-1500 Command Reference Manual

PRESCRIBE Command Reference
MAP —
Move to Absolute Position
Format
Parameters
x-coordinate:
y-coordinate:
Function
File
156
MAP x-coordinate, y-coordinate;
distance from the left margin
distance from the top margin
The MAP command moves the cursor to a position specified relative to the top and left
margins, measured in the units designated by the UNIT command. The coordinates may
be positive or negative. Negative coordinates move the cursor outside the margin.
The MAP command is ignored in path mode graphics.
!R! RES; UNIT C; STM 2; SLM 2;
SFNT 'Helvetica-Nr', 9;
MAP 0, 0; BOX 40, 40; SPD .2;
MAP 0, 1.4; TEXT '< = = = Margins';
MAP 0, 0; CIR .1; TEXT, L; TEXT ' MAP 0, 0;';
MAP 4, 0; CIR .1; TEXT, L; TEXT ' MAP 4, 0;';
MAP 0, 2; CIR .1; TEXT, L; TEXT ' MAP 0, 2;';
MAP 4, 2; CIR .1; TEXT, L; TEXT ' MAP 4, 2;';
MAP -1, -1; CIR .1; TEXT, L; TEXT ' MAP -1, -1;';
PAGE;
EXIT;