Table of Contents
Advertisement
Adjusting the overhang
The position of the cartridge must be accurately determined (adjusting the overhang) when mounting a cartridge or
headshell other than the one provided.
1
Mount the cartridge so it is parallel to the headshell.
Match up the positions of the cartridge and headshell to the overhang adjustment guide on the figure and
mount the cartridge so it is parallel to the headshell.
This illustration represents the actual size.
Place the headshell on the figure, and then adjust the stylus tip of the new cartridge along the lines for the
"Stylus tip" of the cartridge.
1
1
Stylus tip
2
Mount the cartridge so it is vertical to the headshell.
38
Advertisement
Table of Contents
