Table of Contents
Advertisement
Preparation for use
Assembling the tonearm
1
Remove the cable tie used to secure the tonearm at the time of delivery.
Use the clamp to temporarily secure the tonearm to the tonearm rest.
2
Insert the headshell into the tonearm.
Hold the right and left edges of the headshell so that you do not damage the stylus or cut the cartridge's
wires.
3
With the headshell inserted, turn the locking ring counterclockwise (to the left).
4
Attach the counterweight to the back of the tonearm and slowly turn it counterclockwise (to the
left).
12
Advertisement
Table of Contents
