Table of Contents
Advertisement
Using the product with a wired connection
Before playing a record
1
Plug the AC adapter into an outlet.
For safety, raise the tonearm by lifting the tonearm lift control lever to the UP position.
Make sure that the power switch is off and the control knob is in the "STOP" position. If the power switch
remains on while the AC adapter is connected, a standby current is always running through the product, even
when it is not being used.
2
Remove the cartridge's protector.
Pull the protector straight forward to remove it.
If the tonearm is fixed to the tonearm rest, remove the clamp.
3
Place the record on the rubber mat so that the center hole aligns with the spindle.
At 33-1/3 RPM
At 45 RPM
To play a 45 RPM record, attach the 45 RPM adapter.
28
Advertisement
Table of Contents
