Table of Contents
Advertisement
Preparation for use
Make certain that the platter is fully seated on the spindle.
Align one of the openings with the position of the motor pulley (brass-colored) (See the diagram below).
To avoid damaging the spindle when seating the platter, align the positions of the spindle and the platter's
hole, and then slowly seat the platter.
1
1
Motor pulley (brass-colored)
2
Attach the drive belt to the motor pulley (brass-colored).
Make sure that the belt does not get twisted.
3
Set the rubber mat on the platter.
11
Advertisement
Table of Contents
