Table of Contents
Advertisement
Using the product with a wired connection
1
Tonearm lift control lever
4
Position the tonearm over the desired location (groove) on the record.
5
Lower the tonearm by moving the tonearm lift control lever to the DOWN position.
Alternatively, you can skip steps 3 and 4, and use your fingers to lift the headshell, move the tonearm over the
desired location on the record, and then place the headshell down to begin playing the record.
Do not subject the product to strong impact during playback.
The tonearm descends slowly onto the record and play begins.
Pausing the record
1
After lowering the volume of the amplifier, active speakers, etc., sufficiently, lift the tonearm with
the tonearm lift control lever.
Stopping the record
1
Lower the volume of the amplifier, active speakers, etc. sufficiently.
2
Lift the tonearm lift control lever.
3
Return the tonearm to its original position and fix it with the clamp.
4
Turn the control knob to the "STOP" position.
The platter slows down and rotation stops.
5
Remove the record after the platter has come to a complete stop.
6
Attach the protector.
30
Advertisement
Table of Contents
