Pausing The Record; Stopping The Record - Audio Technica AT-LPW50BT User Manual

Using the product with wireless connection
Alternatively, you can skip steps 3 and 4, and use your fingers to lift the headshell, move the tonearm over the
desired location on the record, and then place the headshell down to begin playing the record.
Do not subject the product to strong impact during playback.
The tonearm descends slowly onto the record and play begins.

Pausing the record

1
After lowering the volume of the wireless headphones, wireless speakers, etc., sufficiently, lift the
tonearm with the tonearm lift control lever.

Stopping the record

1
Lower the volume of the wireless headphones, wireless speakers, etc. sufficiently.
2
Lift the tonearm lift control lever.
3
Return the tonearm to its original position and fix it with the clamp.
4
Turn the control knob to the "STOP" position.
The platter slows down and rotation stops.
5
Remove the record after the platter has come to a complete stop.
6
Attach the protector.
If the rubber mat gets dirty, it can easily scratch the record, so remove the rubber mat periodically and wipe
off any dust.
To prevent the record from becoming scratched or warped, remove it after use.
Do not use a disk stabilizer.
Do not use a platter other than the one provided.
This product is not intended for DJs. Do not touch the record or the platter while the record is playing.
23