Audio Technica AT-LPW50BT User Manual
  1. Manuals
  2. Brands
  3. Audio Technica Manuals
  4. Turntable
  5. AT-LPW50BT
  6. User manual

Audio Technica AT-LPW50BT User Manual

Wireless belt-drive turntable
Hide thumbs Also See for AT-LPW50BT:
Table of Contents

Advertisement

Quick Links

Download this manual
AT-LPW50BT
Wireless Belt-Drive Turntable
User Manual
English

Advertisement

Table of Contents
loading

Related Manuals for Audio Technica AT-LPW50BT

Summary of Contents for Audio Technica AT-LPW50BT

  • Page 1 AT-LPW50BT Wireless Belt-Drive Turntable User Manual English...
  • Page 2 Introduction This product can be used only in the countries where the product is sold. Make sure that the operating voltage and the plug of AC adapter of the product are correct for the country you live in.

  • Page 3: Safety Precautions

    Safety precautions Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product. Important information Warning To prevent fire or shock hazard, do not expose this apparatus to rain or moisture. Caution Do not expose this apparatus to drips or splashes.

  • Page 4: For Customers In Canada

    Safety precautions Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 5: Notes On Use

    Notes on use Turntable body Do not set and use the product in locations that are considerably hot or humid, dirty, or subject to extreme vibrations. The product should be positioned on a flat, level surface. When closing the dust cover, close it completely. When using this product with a Bluetooth device connected to it, be sure to also read the user manual for the Bluetooth device.

  • Page 6: Package Contents

    Package contents Make sure that you have all the included items before using this product. If some items are missing or damaged, contact your local Audio-Technica dealer. After purchase, we suggest that you save all packaging materials for possible future storage, moving, or shipping. Turntable body Platter Drive belt...
  • Page 7 Package contents Headshell (AT-HS4 SV) with VM stereo cartridge (AT-VM95E BK) Counterweight 45 RPM adapter AC Adapter RCA audio cable (Approx. 1.0 m (3.3')) Quick Start Guide Caution Guide...

  • Page 8: Part Names And Functions

    Part names and functions Top view Platter Drive belt Motor pulley (brass-colored) Spindle Rubber mat Control knob Use to select the platter speed (33-1/3 or 45 RPM) or start/stop the platter. Tonearm Rear view Feet Adjust the level of the product. Dust cover hinge holders Attachment points for dust cover hinges.
  • Page 9 Part names and functions Ground (earth) terminal Connect the amplifier’s ground (earth) terminal to this terminal using the RCA audio cable’s ground line. Stereo output terminals Connect the RCA audio cable. Connect it to either the amplifier’s PHONO input jack or its line input jack. The red terminal is the right channel and the white terminal is the left channel.
  • Page 10 Part names and functions Tonearm lift Moves the tonearm vertically to and from the face of the record. Tonearm rest with clamp Use the clamp to secure the tonearm so that it does not move. Anti-skate control dial While the record is playing, a force acts on the stylus tip to pull it inward. This force can be counteracted by setting the same values for anti-skate and the tracking force.

  • Page 11: Preparation For Use

    Preparation for use Setting up the turntable Position the product on a level surface. To avoid the effects of vibrations and acoustic pressure, do not mount the product next to such items as speakers. The product may pick up radio static if placed next to a radio. Therefore, try to keep the product away from radios. If the product is near equipment (cell phone, etc.) that emits strong radio waves, noise may occur.
  • Page 12 Preparation for use Make certain that the platter is fully seated on the spindle. Align one of the openings with the position of the motor pulley (brass-colored) (See the diagram below). To avoid damaging the spindle when seating the platter, align the positions of the spindle and the platter’s hole, and then slowly seat the platter.

  • Page 13: Assembling The Tonearm

    Preparation for use Assembling the tonearm Remove the cable tie used to secure the tonearm at the time of delivery. Use the clamp to temporarily secure the tonearm to the tonearm rest. Insert the headshell into the tonearm. Hold the right and left edges of the headshell so that you do not damage the stylus or cut the cartridge’s wires.

  • Page 14: Tonearm Balance And Tracking Force

    Preparation for use Tonearm balance and tracking force In order for the cartridge to pick up sound correctly from the record’s grooves, the tonearm’s balance and tracking force must be adjusted to fit the specifications of the cartridge. If the tonearm’s balance and tracking force are not properly adjusted, the record or the cartridge’s stylus may become damaged.

  • Page 15: Setting Tracking Force

    Preparation for use Tonearm Return the tonearm to the tonearm rest. Setting tracking force While supporting the counterweight so that it does not move, turn the tracking force gauge ring so that its “0” position lines up with the centerline on the back of the tonearm. The tracking force is not adjusted simply by turning the tracking force gauge ring.

  • Page 16: Setting The Anti-Skate Adjustment

    Preparation for use Setting the anti-skate adjustment While the record is playing, a force acts on the stylus tip to pull it inward. This force can be counteracted by setting the same values for anti-skate and the tracking force. Adjust the anti-skate control dial to have the same value as the tracking force value. The tracking force value for the cartridge provided with this product is 2.0 g.
  • Page 17 Preparation for use When removing the dust cover, slowly pull the dust cover out from the dust cover hinge holders on the body. The dust cover should remain open or off while records are playing.

  • Page 18: Wireless/Wired Connection

    Wireless/wired connection Depending on your usage environment, you can use the wireless connection via Bluetooth or the wired connection to active speakers or the like using the RCA audio cable. Connecting wirelessly To wirelessly connect the product to connectable equipment using Bluetooth, refer to "Using the product with wireless connection"...

  • Page 19: About Pairing

    Using the product with wireless connection This product is Bluetooth compatible. You can connect this product to the Bluetooth-compatible headphones, speakers, etc. (hereinafter referred to as a Bluetooth device). About pairing To connect this product to a Bluetooth device, first pair (register) the product with the device. Once they are paired, you do not need to pair them again.
  • Page 20 Using the product with wireless connection Hold down the wireless function button (approx. 2 seconds). The Bluetooth indicator LED starts flashing blue. Wireless function button Bluetooth indicator LED When pairing is completed, the Bluetooth indicator LED lights in blue. The pairing mode of this product automatically ends after a fixed amount of time (approx. 30 seconds). If pairing is not completed successfully, follow the same pairing steps again.

  • Page 21: Before Playing A Record

    Using the product with wireless connection Bluetooth indicator LED Pairing Operating status Indicator display pattern Searching for devices Flashing blue Connecting Operating status Indicator display pattern Waiting for connection Flashing blue Connecting Lit in blue Before playing a record Remove the cartridge’s protector. Pull the protector straight forward to remove it.
  • Page 22 Using the product with wireless connection At 33-1/3 RPM At 45 RPM To play a 45 RPM record, attach the 45 RPM adapter. Turn on the power of the Bluetooth device. When this product is correctly connected to the Bluetooth device, the product’s Bluetooth indicator LED lights in blue.

  • Page 23: Playing A Record

    Using the product with wireless connection Playing a record Lower the volume of the wireless headphones, wireless speakers, etc. sufficiently. Turn on the power switch. Use the control knob to select the speed. Select “33” for a 33-1/3 RPM record and “45” for a 45 RPM record. The platter begins spinning.

  • Page 24: Pausing The Record

    Using the product with wireless connection Alternatively, you can skip steps 3 and 4, and use your fingers to lift the headshell, move the tonearm over the desired location on the record, and then place the headshell down to begin playing the record. Do not subject the product to strong impact during playback.

  • Page 25: Setting Pre-Amplifier Selector Switch

    Using the product with a wired connection According to the settings for the pre-amplifier selector switch, connect the RCA audio cable to an input jack on the connectable equipment you are using (amplifier, receiver, active speakers, sound card, etc.). Setting pre-amplifier selector switch This product has a built-in phono equalizer function.
  • Page 26 Using the product with a wired connection Active speakers Connecting to connectable equipment (amplifier, etc.) The RCA audio cable’s red jack is for the right (R) channel, and the white jack is for the left (L) channel.
  • Page 27 Using the product with a wired connection With PHONO input PHONO Connectable equipment (amplifier, etc.)
  • Page 28 Using the product with a wired connection Without PHONO input Connectable equipment (amplifier, etc.) Depending on the equipment you are connecting, a ground (earth) terminal may exist near the phono input jack. If this is the case, connect to it using the ground line from the RCA audio cable. This will help prevent a low humming noise that might otherwise be heard during playback.
  • Page 29 Using the product with a wired connection Before playing a record Plug the AC adapter into an outlet. For safety, raise the tonearm by lifting the tonearm lift control lever to the UP position. Make sure that the power switch is off and the control knob is in the “STOP” position. If the power switch remains on while the AC adapter is connected, a standby current is always running through the product, even when it is not being used.
  • Page 30 Using the product with a wired connection Playing a record Lower the volume of the amplifier, active speakers, etc. sufficiently. Turn on the power switch. Use the control knob to select the speed. Select “33” for a 33-1/3 RPM record and “45” for a 45 RPM record. The platter begins spinning.
  • Page 31 Using the product with a wired connection Tonearm lift control lever Position the tonearm over the desired location (groove) on the record. Lower the tonearm by moving the tonearm lift control lever to the DOWN position. Alternatively, you can skip steps 3 and 4, and use your fingers to lift the headshell, move the tonearm over the desired location on the record, and then place the headshell down to begin playing the record.
  • Page 32 Using the product with a wired connection If the rubber mat gets dirty, it can easily scratch the record, so remove the rubber mat periodically and wipe off any dust. To prevent the record from becoming scratched or warped, remove it after use. Do not use a disk stabilizer.
  • Page 33 Care Turntable body When the turntable body is dirty or dusty, first turn off the power switch, disconnect the AC adapter, and then wipe off the dirt and dust with a soft, dry cloth. Do not use benzenes, thinners, etc. If the rubber mat gets dirty, it can easily scratch the record, so remove the rubber mat periodically and wipe off any dust.

  • Page 34: Replacing The Stylus

    Replacing the stylus Removing the stylus In addition to the deterioration of sound quality, records may also be damaged as the cartridge’s stylus tip wears down. As a rule of thumb, replace the stylus after 300 hours of use. Be sure to first turn off the power switch, and then disconnect the product’s AC adapter from the outlet. When replacing the stylus, hold the headshell and the cartridge body firmly.

  • Page 35: Replacing A Cartridge

    Replacing a cartridge Refer to the user manual for the cartridge that you will be using if you are replacing the cartridge with a commercially available one. After you replace the old cartridge with a new one, you must readjust the overhang and the tonearm’s balance and tracking force.

  • Page 36: Replacing The Belt

    Replacing the belt The belt is a consumable part. Replace the belt if the speed of playback slows down or irregular rotation occurs. As a rule of thumb, we suggest replacing the belt once a year. Before replacing the belt, first turn off the power switch, and disconnect the product’s AC adapter from the outlet. Remove the rubber mat.
  • Page 37 Replacing the belt Belt Attach the platter. Align one of the openings with the position of the motor pulley (brass-colored). Opening Motor pulley (brass-colored) Place the belt on the motor pulley (brass-colored). Grasp the belt that was attached in step 3 and, while pulling it, place it on the brass motor pulley.
  • Page 38 Replacing the belt Belt Motor pulley (brass-colored) Set the rubber mat on the platter.

  • Page 39: Adjusting The Overhang

    Adjusting the overhang The position of the cartridge must be accurately determined (adjusting the overhang) when mounting a cartridge or headshell other than the one provided. Mount the cartridge so it is parallel to the headshell. Match up the positions of the cartridge and headshell to the overhang adjustment guide on the figure and mount the cartridge so it is parallel to the headshell.

  • Page 40: When The Turntable Is Moved

    When the turntable is moved Using the product’s original packaging materials, pack the turntable in the reverse order of unpacking it. If you do not have the original packaging materials, take the following measures: After turning off the power switch, disconnect the AC adapter from the outlet, remove the rubber mat and platter, and then wrap the turntable body so that it does not get damaged.

  • Page 41: Troubleshooting

    Troubleshooting The platter does not spin. Is the AC adapter connected to the outlet? Connect AC adapter to the outlet. Has the belt slipped from the platter? Correctly place the belt on the platter. Is the belt placed on the motor pulley? Check that the belt is placed on the motor pulley (brass-colored) correctly.
  • Page 42 Troubleshooting Is the product mounted on an unstable surface? Check whether the surface on which the product is mounted is suitable. There is noise when the record is playing. Is there dust on the cartridge’s stylus tip? If dust is stuck to the stylus tip, clean it with a commercially sold brush.
  • Page 43 Troubleshooting Keep the product away from TVs, radios, and devices with built-in tuners. The operation of these devices can be affected by the product. Keep the space between the product and the Bluetooth device free from obstacles such as people, metal, or walls and place the product and device closer to each other.
  • Page 44 Dimensions (Unit: mm)

  • Page 45: Communication Specifications

    Specifications Communication specifications Communication system Bluetooth version 5.2 RF output 15 mW EIRP Maximum communication Line of sight - approx. 10 m (33') range Frequency band 2.402 GHz to 2.480 GHz Modulation method GFSK, Pi/4DQPSK, 8DPSK Compatible Bluetooth profile A2DP Supported codec Turntable specifications Type...

  • Page 46: General Specifications

    BK), 45 RPM adapter, RCA audio cable (Approx. 1.0 m (3.3')), AC adapter (Approx. 1.5 m (4.9')) Replacement stylus (sold AT-VMN95E BK separately) Replacement headshell (sold AT-HS4 SV separately) Replacement belt (sold AT-LPW50BT exclusive belt separately) For product improvement, the product is subject to modification without notice.
  • Page 47 Trademarks ® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Audio-Technica Corporation is under license. Other trademarks and trade names are those of their respective owners.
  • Page 48 株式会社オーディオテクニカ 〒194-8666 東京都町田市西成瀬2-46-1 www.audio-technica.co.jp Audio-Technica Corporation 2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan www.audio-technica.com ©2022 Audio-Technica Corporation Global Support Contact: www.at-globalsupport.com 162502480-02-01 ver.1 2022.08.01...

This manual is also suitable for:

At-lpw50btrw

Table of Contents