Audio Technica AT-LPW30TK User Manual
  1. Manuals
  2. Brands
  3. Audio Technica Manuals
  4. Turntable
  5. AT-LPW30TK
  6. User manual
Audio Technica AT-LPW30TK User Manual

Audio Technica AT-LPW30TK User Manual

Belt-drive turntable
Hide thumbs Also See for AT-LPW30TK:
Table of Contents

Advertisement

Quick Links

Download this manual
AT-LPW40WN/AT-LPW30TK
User Manual
Belt-Drive Turntable

Advertisement

Table of Contents
loading

Related Manuals for Audio Technica AT-LPW30TK

Summary of Contents for Audio Technica AT-LPW30TK

  • Page 1 AT-LPW40WN/AT-LPW30TK User Manual Belt-Drive Turntable...

  • Page 2: Package Contents

    • Quick start guide • Caution guide • 45 RPM adapter • RCA audio cable (Approx. 1.0 m (3.3')) * AT-LPW40WN: AT-VM95E / AT-LPW30TK: AT-VM95C After purchase, we suggest that you save all packaging materials for possible future storage, moving, or shipping.

  • Page 3: Safety Precautions

    Safety precautions Notes on use Important information Turntable body Warning: • Do not place and use the product in locations that are considerably • To prevent fire or shock hazard, do not expose this apparatus to rain hot or humid, dirty, or subject to extreme vibrations. or moisture.

  • Page 4: Part Names And Functions

    Part names and functions Overall diagram Platter Ground (earth) terminal Connect the amplifier's ground (earth) terminal to this terminal Drive belt using the RCA audio cable's ground conductor. Installation is required for operation. Stereo output terminals Motor pulley Connect the RCA audio cable. Connect it to either the amplifier's PHONO input jack or its line input jack.
  • Page 5 Locking ring Rotate the ring to the left (counterclockwise) to secure the headshell. To remove the headshell, rotate the ring to the right. Headshell and cartridge The cartridge* is attached to the headshell (AT-HS4). * AT-LPW40WN: AT-VM95E / AT-LPW30TK: AT-VM95C...

  • Page 6: Preparation For Use

    Preparation for use Leveling the turntable Placing the platter 1. After positioning the product where you want to use it, adjust the This product requires some assembly before using it for the first time. feet so that the product is level. Do not connect the AC adapter until assembly is complete.
  • Page 7 Preparation for use Tonearm balance and tracking force Setting tracking force In order for the cartridge to reproduce audio correctly from the record’s 1. While supporting the counterweight so that it does not move, turn the tracking force gauge ring so that its “0” position lines up grooves, the tonearm’s balance and tracking force must be adjusted with the centerline on the back of the tonearm.
  • Page 8 Preparation for use • The RCA audio cable's red jack is for the right (R) channel, and the Installing/removing the dust cover white jack is for the left (L) channel. When attaching the dust cover, insert the hinges of the dust cover With PHONO input* Without PHONO input into the two dust cover hinge holders on the back of the body.

  • Page 9: Playing A Record

    Playing a record 5. Lower the tonearm by moving the tonearm lift control lever to the Before playing a record DOWN position. The tonearm descends slowly onto the record and play begins. 1. Remove the cartridge’s protector. • Alternatively, you can skip steps 2 to 4, and use your fingers to lift the •...

  • Page 10: Replacing The Stylus

    Care Replacing the stylus Turntable body Removing the stylus • When the turntable body is dirty or dusty, first disconnect the AC • In addition to the deterioration of sound quality, records may also be adapter's cord from the power input jack, and then wipe off the dirt damaged as the cartridge’s stylus tip wears down.

  • Page 11: Replacing A Cartridge

    Replacing a cartridge Replacing the belt Refer to the user manual for the cartridge that you will be using if you • The belt is a consumable part. Replace the belt if the speed of are replacing the cartridge included with this product with another, playback slows down or irregular rotation occurs.

  • Page 12: Adjusting The Overhang

    Adjusting the overhang When the turntable is moved The position of the cartridge must be accurately determined (adjusting the Using the product's original packing materials, wrap the turntable in overhang) when mounting a cartridge or headshell other than the one provided. the reverse order from when you unwrapped it.

  • Page 13: Troubleshooting

    Troubleshooting Problem Solution The platter does not spin. • Is the AC adapter connected to the outlet? Connect AC adapter to the outlet. • Has the AC adapter's plug come off? Check whether or not the plug is properly attached to the AC adapter. •...

  • Page 14: Specifications

    AT-LPW40WN/AT-LPW30TK exclusive Applicable cartridge weight 12 to 17 g separately) belt range (including headshell) * AT-LPW40WN: AT-VM95E / AT-LPW30TK: AT-VM95C Cartridge and headshell specifications Specifications are subject to change without notice due to Cartridge Model AT-LPW40WN: AT-VM95E improvements. AT-LPW30TK: AT-VM95C...
  • Page 15 Audio-Technica Corporation 2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan ©2019 Audio-Technica Corporation ver.1 2018.11.15 162501230-01-02 ver.2 2019.03.01 Global Support Contact: www.at-globalsupport.com...

This manual is also suitable for:

At-lpw40wnAt-lpw30tek

Table of Contents