Installing The Intel Acceleration Stack Development Package On The Host Machine; Verifying The Installation - Intel D5005 Quick Start Manual

2. System Requirements and Release Installation
UG-20202 | 2019.08.05
2.4.3. Installing the Intel Acceleration Stack Development Package on the
Host Machine
Use this installation for Accelerator Functional Unit (AFU) development and
compilation.
1. Extract the runtime archive file:
tar xvf *dev_installer.tar.gz
2. Change to the installation directory:
cd *dev_installer
3. Run setup.sh.
./setup.sh
4. You are prompted with the following question: Do you wish to install the OPAE?
Option
Select Yes
Select No
5. Accept the license.
6. When you receive an installation directory prompt, you can specify an install
directory. Otherwise, the installer uses the default directory at
<username>/inteldevstack
and the Intel SDK for OpenCL*.
7. Run the initialization script to set the required environment variables,
QUARTUS_HOME
source /home/<username>/inteldevstack/init_env.sh
Note: To avoid having to setup the environment variables after every reboot, save
8. Run the script
management controller (BMC). For detailed instructions, refer to
Interface Manager (FIM) and BMC Firmware Version
The
$OPAE_PLATFORM_ROOT
throughout the document. The following command prints the environment variable
OPAE_PLATFORM_ROOT
echo $OPAE_PLATFORM_ROOT
Related Information
Installing the OPAE Software Package

2.4.4. Verifying the Installation

Ensure the Intel Acceleration Stack installed correctly.
Send Feedback
Description
If you have admin and network access.
If you do not have admin and network access. After the installation, follow the
manual steps listed in section Installing the OPAE Software Package.
,
OPAE_PLATFORM_ROOT
the exported environment variables to your shell initialization script.
setup_fim_and_bmc.sh
.
Intel Acceleration Stack Quick Start Guide: Intel FPGA Programmable
to install Intel Quartus Prime Pro Edition Software
, and other OpenCL variables.
to update the fpga image and board
on page 13.
is used as a relative path to executables and files
on page 11
/home/
Identify the FPGA
Acceleration Card D5005
9