Table of Contents
Advertisement
UG-20202 | 2019.08.05
Send Feedback
B. Troubleshooting Frequently Asked Questions (FAQ)
B.1. Why do I see a "No Suitable slots found" message when
running
fpgaconf
If you see a No suitable slots found message, ensure that your FIM version is
compatible with your AFU image by completing the following steps:
1. Refer to
page 13 to determine the required <FIM version>.
2. To verify that the AFU is compatible with the FIM version, run the following
command:
packager gbs-info --gbs=<gbs-file>
For example, for
packager gbs-info --gbs=$OPAE_PLATFORM_ROOT/hw/samples/nlb_mode_0/bin/
\nlb_mode_0.gbs
Sample output:
{
"version": 1,
"afu-image": {
f89e-433683f9040b"
}
}
The interface-uuid should match the FIM version (PR interface ID) you found in
Identify the FPGA Interface Manager (FIM) and BMC Firmware Version
B.2. How do I flash the FIM or program the AFU in a multicard
system?
The OPAE commands
device and function numbers as arguments to target the specific Intel FPGA PAC.
Intel Corporation. All rights reserved. Agilex, Altera, Arria, Cyclone, Enpirion, Intel, the Intel logo, MAX, Nios,
Quartus and Stratix words and logos are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or
other countries. Intel warrants performance of its FPGA and semiconductor products to current specifications in
accordance with Intel's standard warranty, but reserves the right to make changes to any products and services
at any time without notice. Intel assumes no responsibility or liability arising out of the application or use of any
information, product, or service described herein except as expressly agreed to in writing by Intel. Intel
customers are advised to obtain the latest version of device specifications before relying on any published
information and before placing orders for products or services.
*Other names and brands may be claimed as the property of others.
on my AFU image?
Identify the FPGA Interface Manager (FIM) and BMC Firmware Version
nlb_mode_0.gbs
"interface-uuid": "8e5d8914-e35d-5e92-ab36-c9082a2b1934",
"afu-top-interface": {
"class": "ccip_std_afu"
},
"magic-no": 488605312,
"power": 0,
"accelerator-clusters": [
{
"total-contexts": 1,
"name": "nlb_400",
"accelerator-type-uuid": "d8424dc4-a4a3-c413-
}
]
fpgaflash, fpgabist,
run the following command:
and
fpgaconf
on
on page 13.
use the PCIe bus,
ISO
9001:2015
Registered
Advertisement
Table of Contents
