Table of Contents
Advertisement
• Input and output wiring
• DC power requirements
• Cellular signal strength
Contact (reed switch) position
Like a standard door/window contact, the Alarm.com
Flex IO™ sensor can be installed with the accompanying
magnet to detect activity at potential entryways.
To determine your installation orientation, consider the
following:
• Three separate reed switch positions are available.
Only one reed switch position can be active at a
time. You will select the reed switch position in Step
2.
• Use the tick marks on the sides of the device for
guidance:
◦ | = Position 1
◦ || = Position 2
◦ ||| = Position 3
• The magnet should be positioned no more than 1.25
inches from the device.
For additional information about using the sensor as a
reed switch, see
Using the Alarm.com Flex IO™ sensor
as a reed
switch.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Cellular_Sensors/Alarm.com_Flex_IO%E2%84%A2_sen...
Updated: Mon, 10 Oct 2022 23:21:36 GMT
4
Advertisement
Table of Contents
Need help?
Do you have a question about the Knowledge Base Flex IO ADC-FLEX-100 and is the answer not in the manual?
Questions and answers