Polycom Vbp 7301 Ethernet Leds - Polycom VBP 7301 Hardware Installation Manual

Polycom VBP 7301 Hardware Installation Guide

Polycom VBP 7301 Ethernet LEDs

Label Color
ACT/Link Green
Green
Speed Yellow
Green
© 2015 Polycom, Inc. All Rights Reserved.
Indication Status
On Ethernet port is receiving power.
Good link between the Ethernet port and the
connected switch.
Off The adapter and switch are not receiving power.
No connection between both ends of the network
cable. Check cable, replace cable.
Flashing The adapter is sending and receiving network data.
The frequency of the flashing varies with the
amount of data being transferred.
On ACK/LINK LED must be on. This LED will show the
system operating at 1000 Mbps.
On ACK/LINK LED must be on. This LED shows the
system operating at 100 Mbps.
Off ACK/LINK LED must be on. This LED shows the
system operating at 10 Mbps.
Components
4