Document Change List - Silicon Laboratories Si5328 Family Reference Manual

Any-frequency precision clocks
Table of Contents

Advertisement

Si 53 xx -RM
D
C
OCUMENT
HANGE
Revision 0.3 to Revision 0.4
Updated AC Specifications in Table 8, "AC Characteristics—All Devices"
Added Si5365, Si5366, Si5367, and Si5368 operation at 3.3 V
Updated Section "6.8. Frame Synchronization Realignment (Si5368 and CK_CONFIG_REG = 1)"
Added input clock control diagrams in Section "6.4. Input Clock Control"
Added new crystals into Table 50, "Approved 114.285 MHz Crystals," on page 108.
Updated "Appendix D—Alarm Structure" on page 141
Added "Appendix F—Typical Performance: Bypass Mode, PSRR, Crosstalk, Output Format Jitter" on page 150
Revision 0.4 to Revision 0.41
Added Si5324.
Revision 0.41 to Revision 0.42
Moved Si5326 specifications to the Si5326 data sheet.
Corrected Figure 21, "Jitter Tolerance Mask/Template."
Simplified Section "4. Device Specifications"
Updated Figure 41, "CMOS Termination (1.8, 2.5, 3.3 V)."
Revision 0.42 to Revision 0.5
Added Si5327, Si5369, Si5374, and Si5375.
Removed Si5319 and Si5323 from the spec tables.
Updated the typical phase noise plots.
Added new appendixes G, H, I, and J.
Updated spec table values.
Added examples and diagrams throughout.
Revision 0.5 to Revision 0.51
Updated Table 50 in Appendix A.
Updated Figure 41 on page 95.
Corrected Figure 90 Alarm Diagram on page 142.
180
L
IST
Rev. 1.3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Si5328 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents