Genius Status Data; Fault Status Data; Module Led Indicators - Emerson PACSystems RX3i User Manual

User manual
GFK-2892G
5.1.2

Genius Status Data

For the Genius Status Data, status bits are arranged in ascending order of the Genius Serial
Bus Addresses (SBAs), beginning at the first %I status reference assigned to this bank of 32.
Figure 30: Genius Status Data
Bit Condition
OFF
ON
5.1.3

Fault Status Data

For the Fault Status Data, the bits are arranged in ascending order of the Genius Serial Bus
Addresses (SBAs), beginning at the first %I status reference assigned to this bank of 32.
Figure 31: Fault Status Data
Bit Condition
OFF
ON
5.2

Module LED Indicators

Refer to Section
Diagnostics
Meaning of Genius Status Bit
• No device has logged onto the Genius Bus at this SBA, or
•
a device has not been configured for this SBA, or
• there is a mismatch between the PME hardware configuration and the
device that is installed, or
• the device is not able to communicate.
Device is configured, has logged-in and is communicating at the
corresponding SBA.
Meaning of Fault Status Bit
No fault is present on this device
No device is configured at this SBA, or
the device at this SBA is configured but is offline, or
the device at this SBA is configured and online but has one or more
diagnostic faults present.
above for a description of LED indications.
Chapter 5
Sep 2019
44