Table of Contents
Advertisement
UM0893
4.2.2
Build, download and run the sample planet application on the
application board
To build, download and run the sample planet application on an application board, use the
related IAR project provided within the SimpleMAC software library package following the
instructions described in
4.2.3
Set up a star network
On the planet node, press button S1 to join the network formed by the STM32W108xx sun
node. Once joined, the planet node is displayed on the SimpleMAC sun PC applet.
Figure 15. Planet device joining the network
When a planet device sends data to the sun device (at a periodic rate), a line connecting the
transmitting planet to the sun is displayed on the SimpleMAC sun PC applet, as well as the
sent application board VDD_PADS value (in mV).
STM32W108 SimpleMAC demonstration applications
Section
3.3.
Doc ID 16995 Rev 10
27/54
Advertisement
Table of Contents
Need help?
Do you have a question about the SimpleMAC STM32W108 Series and is the answer not in the manual?
Questions and answers