Advantage Engineering TRANS PRO X Series Operation Manual page 9

II. Safety Information
WARNING
Risk of injury.
• This equipment should be operated by qualified personnel only.
• Use this equipment only as described in this manual.
• Loop the power cord loosely in its proper location when machine is not in use.
• Do not operate equipment with a damaged power cord or hoses, or if the
equipment has been dropped or damaged, until it has been examined by a qualified
service representative.
• Care should be taken to arrange the power cord and service hoses so that they
will not be tripped over or pulled.
• Never pull on the power cord or service hoses to transport the TRANS PRO
system. Damage may occur to these components, or machine may tip over.
• Keep area of operation clear of unnecessary tools and equipment. Utilize storage
area on the top of the machine and drawers.
• Never leave the machine running unattended.
• The TRANS PRO system is not designed for any other purpose than the
exchanging, filling, and draining of automatic transmission fluids.
Operation of your TRANS PRO system by anyone other than qualified personnel may result in
injury.
CAUTION
Risk of equipment damage.
• Servicing, transporting, or storing this machine in an attitude other than the normal
operating position can result in fluid spillage and/or component damage.
• Use only the manufacturer's recommended attachments.
• The TRANS PRO system is fully automatic. Refer to your control panel at
all times.
• Never pull on the power cord or service hoses to transport the TRANS PRO
system. Damage may occur to these components, or machine may tip over.
• Periodically clean the machine by wiping down with a clean, soft, dry cloth.
Improper operation of equipment may result in damage to machine or components.
SAVE AND FOLLOW THESE INSTRUCTIONS!
8
Advantage Engineering® TRANS PRO X-Series™
Manual Printed in the U.S.A. for AEC GROUP INC.
Operations Manual