Introduction To The Trans Pro X-Series - Advantage Engineering TRANS PRO X Series Operation Manual

I. Introduction Advantage Engineering® TRANS PRO X-Series™
I. INTRODUCTION TO THE
TRANS PRO X-SERIES
Congratulations on the purchase of your TRANS PRO system.
The TRANS PRO system is a technologically advanced fluid exchanger that
allows convenient, quick, thorough, and accurate automatic transmission fluid
(ATF) exchanges. Utilizing unique and visible dual wheel flow meters it accu-
rately monitors fluid movement to and from the transmission.
Logically arranged, the TRANS PRO's fully electronic and intuitive control
panel allows three (3) modes of operation. TRANS PRO+ offers the addition of
Cooler Line only mode.
• Dipstick only
• Cooler Line only (TRANS PRO+ feature)
• Manual/Top Off
• Drain Waste Tank
The high flow rate of the TRANS PRO system allows most automatic trans-
mission fluid exchanges through the dipstick under 15 minutes.
With this approach, used ATF in the transmission pan is first replaced by new
ATF in the static service phase. This significantly reduces dilution time, mini-
mizes transmission fluid degradation, and optimizes the comprehensiveness
of the ATF service.
Improvements in mileage, transmission life, and power delivery are typically
realized as the result of periodic ATF exchanges. Recommended by most
manufacturers, it should be performed periodically and at the specified inter-
vals to maintain your vehicle's efficiencies.
2 Operations Manual
Manual Printed in the U.S.A. for AEC GROUP INC.