Advantage Engineering TRANS PRO X Series Operation Manual page 26

Advantage Engineering® TRANS PRO X-Series™
Please verify that items 1-4 above have been reviewed before calling of
In the unlikely event that problems persist with the unit call Technical
Support, have you model and serial numbers available before you call.
Remember to send in your warranty card,
Operations Manual
• If dipstick tube with nut and 2 piece ferrule,
make sure that two piece ferrule has proper
orientation and nut is tight.
• If dipstick tube with push lock fitting, make
sure that tube has a proper seal in the push
lock fitting. Remove tube from fitting and
check tube OD for distortions. If distorted,
cut 1/2" length with razor blade and reinstall.
• Check main strainer. Make sure O-ring is
present, properly seated and bowl is hand
tight.
ADDITIONAL HELP
additional assistance.
otherwise service will be delayed.
1-877-906-1395 (U.S. AND CANADA)
Manual Printed in the U.S.A. for AEC GROUP INC.
V. Troubleshooting Guide
25