Ii. Safety Information; Section 1.01: Important Safety Notice - Advantage Engineering TRANS PRO X Series Operation Manual

Advantage Engineering® TRANS PRO X-Series™

II. SAFETY INFORMATION

1.01 IMPORTANT SAFETY NOTICE
For your safety, read this manual thoroughly before operating your TRANS PRO system.
Your TRANS PRO system is intended for use by properly trained, skilled professional
automotive technicians. The safety messages presented below and throughout this
user's manual are reminders to the operator to exercise care when using this unit.
Before using your TRANS PRO system, always refer to and follow the safety messages
and applicable service procedures provided by the manufacturer of the vehicle being
serviced.
• Read All Safety Instructions
Read, understand and follow all safety messages and instructions in this manual.
Safety messages in this section of the manual contain a signal word with a three-part
message and, in some instances, an icon.
• Signal Words
The signal word indicates the level of the hazard in a situation:
DANGER
Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury to the operator or to bystanders.
WARNING
Indicates a potentially hazardous situation which, if not avoided, may
result in death or serious injury to the operator or to bystanders.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may
result in moderate or minor injury to the operator or to bystanders.
IMPORTANT
Indicates a situation which, if not avoided, may result in damage to the
TRANS PRO system or the vehicle being serviced.
• Safety Messages
Safety messages in this section contain three different type styles:
• Normal type states the hazard.
• Bold type states how to avoid the hazard.
• Italic type states the possible consequences of not avoiding the hazard.
Operations Manual
Manual Printed in the U.S.A. for AEC GROUP INC.
II. Safety Information
3