Advantage Engineering TRANS PRO X Series Operation Manual page 14

Advantage Engineering® TRANS PRO X-Series™
KEYS NAME/FUNCTION
5 ADD (ARROW UP)
Button - LED
6 SUBTRACT (ARROW DOWN)
Button - LED
7 PAUSE/ABORT
Button - LED
8 REVERSED POLARITY
LED (red)
9 SUPPLY LINE
LED (red)
10 RETURN LINE
LED (red)
11 MODE
LED (green)
12 START SERVICE
LED (red)
13 START ENGINE
LED (red)
14 END SERVICE
LED (red)
15 CHECK TRANS LEVEL
LED (red)
16 FINISH
LED (red)
17 SELECT
Button (LED – green)
18 ENTER
Button (LED – green)
Operations Manual
DETAILS
Add volume in 1 quart increments
(in CHECK TRANS LEVEL mode, .1 quart increments)
Reduce volume in 1 quart increments
(in CHECK TRANS LEVEL mode, .1 quart increments)
To pause, abort, or reset
Lights when leads are improperly connected to 12V power source
Lights to indicate flow problem in supply line.
Lights to indicate flow problem in return line.
Lights to indicate mode selected
Lights to prompt beginning of fluid exchange process
Lights to prompt engine start during fluid exchange process
Lights to prompt "stop engine" during fluid exchange process
Lights to prompt check of transmission fluid level during fluid
exchange process
Lights when service is complete
Depress to select mode
Depress to confirm selection
Manual Printed in the U.S.A. for AEC GROUP INC.
III. System Features & Specifications
13