Advantage Engineering TRANS PRO X Series Operation Manual page 7

II. Safety Information
WARNING
Transmission systems may maintain residual pressure in lines after the engine has been
turned off.
• Wear safety glasses, chemical resistant gloves, and protective clothing when
connecting and disconnecting lines and adapters.
• Confirm ZERO pressure before connecting and disconnecting lines and adapters.
Exposure to liquids and vapors can cause injury.
WARNING
Risk of expelling pressurized fluids.
• Keep the service hoses away from hot or moving engine parts. Hoses can split or
burst causing fluid to be expelled.
• Tighten all connections properly.
Chemicals and fluids may cause repiratory tract and/or skin and eye irritation.
• Use safety glasses and protective clothing when handling fluids.
• Do not ingest chemicals or breathe vapors
• Treatment methods are as follows:
Eyes: Flush eyes with plenty of water.
Skin: Wash with soap and water.
Inhalation: Move to uncontaminated area.
Ingestion: If large amount, get medical attention.
If any irritation persists, get medical attention.
• Dispose of used fluid according to environmental laws and regulations.
Although transmission fluids pose no significant health hazards, some individuals may
experience adverse reactions upon contact. Pressurized fluid can cause serious injury.
WARNING
Batteries produce explosive gases and can explode.
• Keep sparks and flames away from the battery.
• Do not lay tools, equipment, or other conductive items on the battery.
• Connect the positive lead of the equipment to the positive lead of the battery first.
• Connect the negative lead of the equipment to vehicle ground as far away from
the battery as leads will allow to prevent sparking and igniting of battery gases.
• Keep battery acid away from skin and eyes. In case of eye contact, flush with
clean water for 15 minutes and get medical attention.
Battery explosion and ignited gases can cause injury.
6
Advantage Engineering® TRANS PRO X-Series™
Manual Printed in the U.S.A. for AEC GROUP INC.
Operations Manual