Iii. System Features & Specifications; Section 2.01: Features - Advantage Engineering TRANS PRO X Series Operation Manual

Advantage Engineering® TRANS PRO X-Series™
III. SYSTEM FEATURES & SPECIFICATIONS
2.01 FEATURES
Application
• Exchanges automatic transmission fluid (ATF) in most transmission systems
• Restores power delivery, helps improve fuel economy, and maximizes
transmission service life.
Functions
• Intuitive, fully electronic microprocessor controlled panel with internal fuses, overload,
and ground protection
• Step by step guided operation
• User selectable modes: Dipstick, Cooler Line (TRANS PRO+ feature), manual/top-off,
drain waste tank, total count
• Visible signal for polarity check
• Bright seven segment LED displays function, fluid volume in and out, process
progression and service count
• Board mounted LEDs display indicate available procedures and fluid direction
• Audible alarm and LED display prompt technician involvement to START service,
START engine, CHECK ATF fluid level, and END service
• Waste tank level indicator
• Emergency PAUSE/ABORT button (also used to "reset")
Cabinet Features
• Composite cabinet
• Ergonomically correct working height
• 9" rigid rear wheels
• 4" swivel casters with brakes
• Large new ATF reservoir with readily visible sight gauge
• 8' external nylon reinforced Hytron hoses
• Bi directional high flow rate pump
• Flexible nylon hose for ATF evacuation and filling via dipstick mode
• Two (2) accurate readily visible dual wheel flow meters
Operations Manual
Manual Printed in the U.S.A. for AEC GROUP INC.
III. System Features & Specifications
9