Getting Started; Film Emulsion; Handling Care - Minolta Dimage Scan Multi Hardware Manual

FILM EMULSION

The emulsion side of the film is the side coated with the photographic material. The base side of the film has no
photographic material and its surface is smooth and shiny. The emulsion side of slide film has raised areas at subject
contrast. The emulsion side of negative film is dull compared to the base side. It is easiest to determine the emulsion
side when viewing the film at an angle.
Light
The frame numbers and text are backward when the film's emulsion side is up.

HANDLING CARE

• Do not pull the film holder out of the scanner until the holder is properly ejected and
the green indicator light is off.
• Do not move the scanner or touch the film holder while the transport motor is
engaged (such as while scanning).
• Place the scanner on a stable surface.

GETTING STARTED

14
Viewing angle
FILM EMULSION
Slightly dull or raised surface
FILM BASE
Smooth, shiny surface