2.4.6
USB 2.0 Stack Port (CN15)
The motherboard comes with one stacked Universal Serial Bus (compliant with USB 2.0)
connector on the rear I/O for installing USB peripherals such as keyboard, mouse,
scanner, etc.
Pin
Signal
1
USB_PWR
3
USB#5_D-
5
USB#5_D+
7
GND
2.4.7
Ethernet Ports (CN9 and CN12)
The motherboard supports two Ethernet ports (CN11, CN19): two RJ45 connectors with
CN12: Intel® i225-V controller support 10/100/1000/2500Mbps.
CN9: Intel® i219-V controller support 10/100/1000 Mbps.
Pin
LAN Signal
L1
Tx+ (Data transmission positive)
L3
Rx+ (Data reception positive)
L5
RJ-1 (For 1000 Base-T only)
L7
RJ-1 (For 1000 Base-T only)
A
Speed LED
LAN1: Intel® i219-V
OFF: 10Mbps data rate
Green: 100Mbps data rate
Orange: 1Gbps data rate
LAN2: Intel® i225-V
OFF: 10/100Mbps data rate
Green: 1Gbps data rate
Orange: 2.5Gbps data rate
CN9
CN9/CN12 supports Wake-on-LAN.
Note
2.4.8
PCI-Express Mini Card Connector (CN21)
The CN21 complies with PCI-Express Mini Card Spec. V1.2.
Pin
Signal
1
WAKE#
3
NC
Board and Pin Assignments
Pin
Signal
2
USB_PWR
4
USB#6_D-
6
USB#6_D+
8
GND
Pin
L2
L4
L6
L8
B
CN12
Pin
Signal
2
+3.3VAUX
4
GND
MANO561 Mini ITX Motherboard
LAN Signal
Tx- (Data transmission negative)
RJ-1 (For 1000 Base-T only)
Rx- (Data reception negative)
RJ-1 (For 1000 Base-T only)
Active LED(Yellow)
OFF: No link
Blinking: Link established; data
activity detected
13