Options; Simm (Single In-Line Memory Module); Installing The Optional Simm - Minolta PageWorks Pro 18 User Manual

Options

Options
This section describes the optional items that are available for this
printer:
Memory SIMM(s)
,
Unit Third Paper Cassette Unit
the
Network Interface Card

SIMM (Single In-line Memory Module)

Many errors caused by data overload can be avoided by installing
additional memory into the printer.
This printer comes with 4 MB of memory. You can increase memory
capacity to up to 64 MB by installing an optional 1, 2, 4, 8, 16 or
32 MB SIMM into one or both of the two memory connectors located
inside of the printer.
Note
• Memory capacity can be increased to 64 MB by installing two 32 MB
SIMMs into the printer. (However, it will first be necessary to remove
the 4 MB SIMM that comes installed in the printer.) The successful
installation of the expansion memory can be confirmed by printing a
Configuration Page.

Installing the Optional SIMM

Warning
• Electric shock hazard! Do not remove any cover of the printer that is
not directly specified for removal in the User's Manual.
1
Turn off the printer and unplug the power cord.
2
Disconnect the parallel cable from the printer.
3
Press the top cover release button and open the top cover.
2-16
, ,
Duplex Unit Second Paper Cassette
,
Adobe PostScript ROM-SIMM
.
, and