Using the Control Panel
Printer Setting
Power Save
These controls determine the power saving settings of your printer.
Select the
setting to enable the power saving mode. The mode will
On
be disabled if you check
Off
. The
Power Save Interval
setting
determines the number of minutes that the printer will sit without
receiving a command before entering the power save mode. You can
enter any interval of time from 1 to 60 minutes.
Detect Size Error
This setting enables the printer to automatically detect if paper of a size
that is not currently specified has been loaded into the currently
selected tray. Select
to enable size error detection and
to disable
On
Off
the feature.
Jam Recovery
When this control is
, the printer will save data in the event that the
On
document should jam before it is output. Data is not saved when this
control is set to
.
Off
5-8