Minolta PageWorks Pro 18 User Manual page 65

5
Secure the NIC into place using the same screws that were used
to hold the cover panel.
Note
• Follow the NIC's installation procedure in reverse to remove the NIC.
6
Connect the power cord to the printer and then turn the printer on.
See "Connecting the Power Cord", page 2-9.
See "Turning On the Printer", page 2-12.
7
Generate a configuration page to verify that Network Card is
listed under the Printer Configuration item.
See "Testing the Printer", page 2-13.
PRINTER CONFIGURATION
Tray 2 = Not Installed
Tray 3 = Not Installed
Duplex Unit = Not Installed
PostScript = Not Installed
Network Card = Installed
Options
2-35