Interface Connector And Cable - Minolta PageWorks Pro 18 User Manual

Interface Connector and Cable

Be sure to use only a parallel interface cable that meets the
specifications described below.
Length:
Connectors:
Cable type:
Pin assignments:
Note
• Minolta does not warrant the use of any particular cable. The user
assumes all responsibility as to the quality and performance of the
cable.
Interface Connector and Cable
Less than 10 feet (3 meters)
Printer: Parallel 36-pin connector
PC:
EIA 25-pin connector
Shielded. Each signal and ground pair
should be twisted.
IEEE 1284 type-B connector
8-7