Minolta PageWorks Pro 18 User Manual page 64

Options
2
Remove the screw that secures the cover panel to the back of the
printer. Remove the cover panel.
Note
• Make sure that you do not misplace the cover panel or screws when
you remove them. The screws will be used after the optional NIC is
installed.
3
Take the NIC out of its carton.
Note
• When the NIC is taken out of its conductive bag or off its mat, hold it
by its edges to avoid touching the terminals or the patterned surfaces.
4
Insert the NIC as shown in the diagram.
2-34