Setting Up The Printer Web Page; Determining The Printer Name; Setting Up Your Browser Software - Minolta Magicolor 2200 User Manual

Setting up the Printer Web Page

Setting up the printer web page to run on your intranet involves two basic steps:
Determining the name and address of your printer
Setting up the "no proxy" preferences in your browser software

Determining the Printer Name

The printer web page can be accessed only through the assigned name of the printer or the
IP address. It is more convenient for you to use a name than the address. The name for the
printer comes from the IP host table on the computer system and is usually assigned by the
system administrator, for example, magicolor 2200 DeskLaser.

Setting Up Your Browser Software

Since your printer will reside on your intranet and will not be accessible beyond the
firewall of your network, you must set up the proper "preferences" in your browser
software. Your printer name or IP address must be added to the "no proxy" list in the
preferences dialog box of the browser.
You need to do this procedure only once.
The sample screens in this chapter may be different from yours depending on your version
and platform in use.
Japanese characters may not appear correctly if you are using an early release of
Netscape Navigator or Microsoft Internet Explorer. For Netscape Navigator users, we
recommend using Netscape Navigator version 6 or greater; for Microsoft Internet
Explorer users, we recommend using Internet Explorer version 5 and greater.
Setting up the Printer Web Page 157